Jump to main content
Jump to site search

Issue 31, 2017
Previous Article Next Article

Click chemistry stereolithography for soft robots that self-heal

Author affiliations


Although soft robotics promises a new generation of robust, versatile machines capable of complex functions and seamless integration with biology, the fabrication of such soft, three dimensional (3D) hierarchical structures remains a significant challenge. Stereolithography (SLA) is an additive manufacturing technique that can rapidly fabricate the complex device architectures required for the next generation of these systems. Current SLA materials and processes are prohibitively expensive, display little elastic deformation at room temperature, or exhibit Young's moduli exceeding most natural tissues, all of which limit use in soft robotics. Herein, we report a low-cost build window substrate that enables the rapid fabrication of high resolution (∼50 μm) silicone (polydimethylsiloxane) based elastomeric devices using an open source SLA printer. Our thiol–ene click chemistry permits photopolymerization using low energy (He < 20 mJ cm−2) optical wavelengths (405 nm < λ < 1 mm) available on many low-cost SLA machines. This chemistry is easily tuned to achieve storage moduli, 6 < E < 283 kPa at engineering strains, γ = 0.02; similarly, a large range of ultimate strains, 0.5 < γult < 4 is achievable through appropriate selection of the two primary chemical constituents (mercaptosiloxane, M.S., and vinylsiloxane, V.S.). Using this chemo-mechanical system, we directly fabricated compliant machines, including an antagonistic pair of fluidic elastomer actuators (a primary component in most soft robots). During printing, we retained unreacted pockets of M.S. and V.S. that permit autonomic self-healing, via sunlight, upon puncture of the elastomeric membranes of the soft actuators.

Graphical abstract: Click chemistry stereolithography for soft robots that self-heal

Back to tab navigation

Supplementary files

Publication details

The article was received on 12 Jun 2017, accepted on 05 Jul 2017 and first published on 06 Jul 2017

Article type: Paper
DOI: 10.1039/C7TB01605K
Citation: J. Mater. Chem. B, 2017,5, 6249-6255

  •   Request permissions

    Click chemistry stereolithography for soft robots that self-heal

    T. J. Wallin, J. H. Pikul, S. Bodkhe, B. N. Peele, B. C. Mac Murray, D. Therriault, B. W. McEnerney, R. P. Dillon, E. P. Giannelis and R. F. Shepherd, J. Mater. Chem. B, 2017, 5, 6249
    DOI: 10.1039/C7TB01605K

Search articles by author