Issue 8, 2016

In situ speciation of dissolved inorganic antimony in surface waters and sediment porewaters: development of a thiol-based diffusive gradients in thin films technique for SbIII

Abstract

Antimony is a priority environmental contaminant typically present as either the trivalent (SbIII) or the pentavalent (SbV) oxidation state in aquatic systems. Both the toxicity and mobility of antimony are affected by its speciation, and thus the accurate measurement of antimony speciation is essential for investigating the behaviour of this contaminant in aquatic systems. Here we present a diffusive gradients in thin films (DGT) technique, which utilises a binding layer containing a thiol-based adsorbent (3-mercaptopropyl functionalised silica gel), for the selective measurement of SbIII in surface waters and sediment porewaters. We also evaluated the Metsorb DGT technique, which has been previously reported to accurately measure SbV, for its ability to accumulate SbIII and thus allow the measurement of total inorganic antimony. Both the mercapto-silica and Metsorb DGT techniques showed a high affinity for SbIII, with uptake efficiencies >97%. Elution efficiencies of 86.9 ± 2.6% and 88.1 ± 1.2% were obtained for mercapto-silica and Metsorb, respectively, with 1 mol L−1 H2O2 in 1 mol L−1 NaOH. The accumulation of SbIII by these DGT techniques was linear with time (R2 > 0.99) and unaffected by pH (4.07–8.05), ionic strength (0.001–1.0 mol L−1 NaCl), bicarbonate (1–15 mmol L−1), and an artificial seawater matrix (pH 8.34; salinity 34.8). Finally, the mercapto-silica DGT technique was applied to measure porewater concentrations of SbIII and AsIII in a contaminated freshwater sediment at high resolution.

Graphical abstract: In situ speciation of dissolved inorganic antimony in surface waters and sediment porewaters: development of a thiol-based diffusive gradients in thin films technique for SbIII

Supplementary files

Article information

Article type
Paper
Submitted
22 mar. 2016
Accepted
10 maí 2016
First published
10 maí 2016

Environ. Sci.: Processes Impacts, 2016,18, 992-998

In situ speciation of dissolved inorganic antimony in surface waters and sediment porewaters: development of a thiol-based diffusive gradients in thin films technique for SbIII

W. W. Bennett, M. Arsic, D. T. Welsh and P. R. Teasdale, Environ. Sci.: Processes Impacts, 2016, 18, 992 DOI: 10.1039/C6EM00189K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements