Issue 30, 2024

Superhydrophobic pressure-responsive pressure sensors based on an inner–outer synergistic conductive network of GAF/PDMS

Abstract

Flexible sensors have attracted widespread attention due to their potential applications in wearable technology and motion detection. We have used hydrothermal reduction and sacrificial template methods to prepare a superhydrophobic pressure-sensitive sensor with an internal and external synergistic conductive network based on graphene fragments (GAF) and polydimethylsiloxane (PDMS) sponge. The van der Waals forces between graphene and PDMS enable good combinations of PDMS with GAF and rGO. The combination of flexible PDMS with rigid GAF results in the sponge having good mechanical properties, maintaining good cyclic stability after 1000 loading–unloading cycles. After reduction, a portion of the reduced graphene oxide exists in the form of GAF within the sponge, while another portion exists in the form of rGO particles attached to the surface of the sponge, forming a synergistic conductive network, enhancing the electrical performance of the sensor, with a sensitivity of up to 6.9 kPa−1. Furthermore, the sensor can effectively distinguish different movements of the human body, enabling motion detection. Our research results provide a feasible solution for the manufacturing of high-performance superhydrophobic flexible pressure sensors, which can still function normally even in humid environments.

Graphical abstract: Superhydrophobic pressure-responsive pressure sensors based on an inner–outer synergistic conductive network of GAF/PDMS

Supplementary files

Article information

Article type
Paper
Submitted
17 Mar 2024
Accepted
12 Jun 2024
First published
13 Jun 2024

J. Mater. Chem. C, 2024,12, 11433-11445

Superhydrophobic pressure-responsive pressure sensors based on an inner–outer synergistic conductive network of GAF/PDMS

R. Luo, M. Yang, Y. Zheng, H. Li, X. Li, J. Hu and X. Zhou, J. Mater. Chem. C, 2024, 12, 11433 DOI: 10.1039/D4TC01057D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements