Issue 2, 2024

Polyarylether-based COFs coordinated by Tb3+ for the fluorescent detection of anthrax-biomarker dipicolinic acid

Abstract

In this study, a rare-earth hybrid luminescent material (lanthanide@COF) was constructed for the detection of a biomarker for anthrax (dipicolinic acid, DPA). JCU-505-COOH was prepared by the hydrolysis of the cyano group in JCU-505 via a post-synthetic modification strategy, then the carboxyl groups in JCU-505-COOH coordinated with Tb3+ ions, similar to pincer vising nut. The prepared Tb3+@JCU-505-COOH exhibited a turn-on response toward DPA, which allowed the lanthanide@COF to serve as a fluorescence sensor with excellent selectivity and high sensitivity (binding constant Ka = 3.66 × 103). The fluorescent probe showed satisfactory performance for the determination of DPA in saliva and urine with a detection limit of 0.6 μM. Moreover, we established a facile point-of-care testing (POCT) using the Tb3+@JCU-505-COOH-based fluorescent test paper together with a smartphone for the initial diagnosis of anthrax. As expected, Tb3+@JCU-505-COOH showed great potential for the rapid screening of anthrax due to low cost, simple operation, and wide applicability.

Graphical abstract: Polyarylether-based COFs coordinated by Tb3+ for the fluorescent detection of anthrax-biomarker dipicolinic acid

Supplementary files

Article information

Article type
Paper
Submitted
05 Sep 2023
Accepted
29 Nov 2023
First published
29 Nov 2023

J. Mater. Chem. B, 2024,12, 466-474

Polyarylether-based COFs coordinated by Tb3+ for the fluorescent detection of anthrax-biomarker dipicolinic acid

Y. Liu, M. Wang, Y. Hui, L. Sun, Y. Hao, H. Ren, H. Guo and W. Yang, J. Mater. Chem. B, 2024, 12, 466 DOI: 10.1039/D3TB02070C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements