Issue 36, 2023

Synergetic role of copper-modified phosphotungstic acid supported on titania catalysts for the conversion of bio-glycerol to glycerol carbonate

Abstract

Copper-modified phosphotungstic acid (CuPW) supported on titania materials with various CuPW contents were successfully synthesized by ion exchange followed by an impregnation method. The prepared materials were characterized using XRD, Raman, ammonia TPD, pyridine FT-IR spectroscopy, and BET-surface area measurements. The XRD results revealed that the crystalites of Keggin ions of heteropolyacid were merged with the anatase support. The Raman spectroscopy results of the fresh and regenerated 30 wt% CuPW/TiO2 clearly showed the characteristic peak of Keggin ions being intact with the support. The results from the temperature-programmed desorption (TPD) of ammonia tests revealed that a 30 wt% catalyst possessed a greater number of acidic sites than the other loadings. Pyridine-adsorbed FT-IR spectroscopy suggested that the 30 wt% catalyst calcined at 300 °C had high amount of Lewis and Brønsted acidity. The copper-modified phosphotungstic acid on the titania support significantly altered the Brønsted and Lewis acidity of the catalysts and promoted a remarkable catalytic performance during glycerol carbonylation as well as provided related structural and acidity functionalities to the CuPW/TiO2 catalyst.

Graphical abstract: Synergetic role of copper-modified phosphotungstic acid supported on titania catalysts for the conversion of bio-glycerol to glycerol carbonate

Article information

Article type
Paper
Submitted
20 Jun 2023
Accepted
07 Aug 2023
First published
24 Aug 2023

New J. Chem., 2023,47, 16897-16906

Synergetic role of copper-modified phosphotungstic acid supported on titania catalysts for the conversion of bio-glycerol to glycerol carbonate

B. Viswanadham, V. D. B. C. Dasireddy and B. Putrakumar, New J. Chem., 2023, 47, 16897 DOI: 10.1039/D3NJ02844E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements