Issue 23, 2023

Modulating active oxygen species on α-MnO2 with K and Pb for SCR of NO at low temperatures

Abstract

Low-temperature (LT) selective catalytic reduction (SCR) of NOx has been a research hotspot. However, the roles of oxygen vacancies and active oxygen species in the LT SCR process are still unclear. In this study, we categorized surface-active oxygen species into three groups: Ong (capable of oxidizing NH3 into nitrogen gas), Olg (capable of oxidizing NH3 into laughing gas), and Ono (capable of oxidizing NH3 into nitric oxide). Accordingly, the influence of Pb and K doping on the active oxygen species of α-MnO2 and its LT SCR performance were investigated. The results demonstrate that K doping reduces the generation of Ono while enhancing the production of Ong and Olg. In contrast, Pb doping inhibits the formation of Ong species and decreases the temperature threshold for Ono species generation. Thus, K doping facilitated the SCR performance, while Pb doping improved the NH3 oxidation and reduced the NOx conversion. DFT calculations revealed that K incorporated in the tunnels of MnO2 facilitated NH3 adsorption and reduced the energy barrier for activation, while Pb doping inhibited NH3 adsorption and increased the energy barrier for NH3 activation. The findings provide valuable insight into the roles of active oxygen species and oxygen vacancies in the low-temperature SCR process.

Graphical abstract: Modulating active oxygen species on α-MnO2 with K and Pb for SCR of NO at low temperatures

Supplementary files

Article information

Article type
Paper
Submitted
31 Jul 2023
Accepted
02 Oct 2023
First published
03 Oct 2023

Catal. Sci. Technol., 2023,13, 6685-6698

Modulating active oxygen species on α-MnO2 with K and Pb for SCR of NO at low temperatures

G. Yang, X. Luo, S. Liu, C. Sun and T. Wu, Catal. Sci. Technol., 2023, 13, 6685 DOI: 10.1039/D3CY01068F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements