Issue 24, 2021

A novel site-induced biomolecule anchoring strategy based on solid superacid ZrO2/SO42- for fabricating label-free IgG electrochemical immunosensors

Abstract

In this work, a unique zirconium dioxide solid superacid (ZrO2/SO42−) was utilized for the fabrication of an IgG electrochemical immunosensor. The treated ZrO2 formed a S[double bond, length as m-dash]O bond on the surface, which has the electron-attracting induction effect and can further enhance the quantity and stability of immobilized biomolecules. In addition, using a platinum nanoparticle–chitosan–reduced graphene oxide (PtNP–CHIT–rGO) nanocomposite as a substrate modification material not only improves the conductivity of the electrode, but also increases the effective surface area of the immunosensing platform. The proposed label-free immunosensor has a lower detection limit of 11.0 pg mL−1 and a wide linear range of 0.01–10.0 ng mL−1 and 10.0–4000.0 ng mL−1. Importantly, the immunosensor exhibits good selectivity, excellent stability and reproducibility, and is expected to be applied to the detection of other biomolecules.

Graphical abstract: A novel site-induced biomolecule anchoring strategy based on solid superacid ZrO2/SO42- for fabricating label-free IgG electrochemical immunosensors

Article information

Article type
Paper
Submitted
16 Mar 2021
Accepted
12 May 2021
First published
17 May 2021

New J. Chem., 2021,45, 10850-10856

A novel site-induced biomolecule anchoring strategy based on solid superacid ZrO2/SO42- for fabricating label-free IgG electrochemical immunosensors

X. Chen, L. Song, G. Zhu, J. Ma, A. Xu, W. Zhao, Y. Gu, Y. An and Y. Miao, New J. Chem., 2021, 45, 10850 DOI: 10.1039/D1NJ01279G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements