Issue 12, 2020

Rapid mechanoenzymatic saccharification of lignocellulosic biomass without bulk water or chemical pre-treatment

Abstract

Lignocellulosic material is an abundant renewable resource with the potential to replace petroleum as a feedstock for the production of fuels and chemicals. The large scale deployment of biomass saccharification is, however, hampered by the necessity to use aggressive reagents and conditions, formation of side-products, and the difficulty to reach elevated monosaccharide concentrations in the crude product. Herein we report the high efficacy of Reactive Aging (or Raging, a technique where enzymatic reaction mixtures, without any bulk aqueous or organic solvent, are treated to multiple cycles of milling and aging) for gram-scale saccharification of raw lignocellulosic biomass samples from different agricultural sources (corn stover, wheat straw, and sugarcane bagasse). The solvent-free enzymatic conversion of lignocellulosic biomass was found to proceed in excellent yields (ca. 90%) at protein loadings as low as 2% w/w, without the need for any prior chemical pre-treatment or high temperatures, to produce highly concentrated (molar) monosaccharides. This crude product of mechanoenzymatic depolymerization is non-toxic to bacteria and can be used as a carbon source for bacterial growth.

Graphical abstract: Rapid mechanoenzymatic saccharification of lignocellulosic biomass without bulk water or chemical pre-treatment

Supplementary files

Article information

Article type
Paper
Submitted
12 Mar 2020
Accepted
19 May 2020
First published
19 May 2020

Green Chem., 2020,22, 3877-3884

Rapid mechanoenzymatic saccharification of lignocellulosic biomass without bulk water or chemical pre-treatment

F. Hammerer, S. Ostadjoo, K. Dietrich, M. Dumont, L. F. Del Rio, T. Friščić and K. Auclair, Green Chem., 2020, 22, 3877 DOI: 10.1039/D0GC00903B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements