Issue 16, 2019

Organic light-emitting diodes comprising highly luminescent red-emitting dendrimers with carbazole-based dendrons

Abstract

Saturated red emitting dendrimers have been prepared for use in organic light-emitting diodes (OLEDs). The dendrimers consist of a homoleptic core iridium(III) complex comprising a 2-(thiophen-2-yl)quinoline ligand and fluorenylcarbazolyl-based first generation dendrons with n-propyl surface groups. The dendrimers differ in the position the dendron is attached to the ligand. It was found that the dendrimers had solution photoluminescence quantum yields of up to 86 ± 9%, which is amongst the highest for saturated red phosphorescent emitters. The dendrons and surface groups were found to provide sufficient processing ability to enable good quality films when blended with 4,4′-bis(N-carbazolyl)-1,1′-biphenyl (CBP). The dendrimer with the dendron attached to the quinoline unit of the ligand via a phenyl ring was found to have a film PLQY of 87 ± 10% when blended with CBP at a concentration of 10 wt%. A simple two-layer device comprising an emissive layer containing 10 wt% of the dendrimer in CBP and an electron transport layer was found to have a maximum EQE of 12% with CIE co-ordinates of (0.65, 0.34).

Graphical abstract: Organic light-emitting diodes comprising highly luminescent red-emitting dendrimers with carbazole-based dendrons

Supplementary files

Article information

Article type
Paper
Submitted
13 Nov 2018
Accepted
01 Mar 2019
First published
28 Mar 2019

J. Mater. Chem. C, 2019,7, 4681-4691

Organic light-emitting diodes comprising highly luminescent red-emitting dendrimers with carbazole-based dendrons

S. M. Russell, A. M. Brewer, D. M. Stoltzfus, J. Saghaei and P. L. Burn, J. Mater. Chem. C, 2019, 7, 4681 DOI: 10.1039/C8TC05703F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements