Issue 23, 2017

New particle-based trace explosive test material produced by drop-on-demand inkjet printing for quantitative wipe-sampling studies

Abstract

A new approach is described to prepare particle standards of the explosive 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) for use in quantitative wipe-sampling studies. Screening activities to detect traces of explosives are heavily focused on wipe collection from surfaces such as fabrics, metals, and plastics with speed and efficacy as the goals. Studies to improve the sampling protocols, including development of improved wipe materials and selection of best surfaces, depend upon the availability of test materials that mimic particles in fingerprints made after handling explosives. RDX particle arrays were prepared by drop-on-demand (DOD) inkjet printing onto polytetrafluoroethylene (PTFE) substrates and then transferred by rubbing onto target surfaces. The particle size distributions in the transferred deposits approximately match the distributions measured from fingerprints (size range of 1 to 40 μm) for equivalent total masses of RDX, and the transfer is better than 95% efficient to three realistic surfaces; woven nylon, synthetic leather, and brushed steel. DOD inkjet printing can be tailored to produce the desired particle sizes by changing the total deposit mass at each point in the array. Deposits will not transfer efficiently to surfaces smoother than the PTFE transfer substrate. Wipe-sampling studies conducted with the new test materials at a fixed force and for a specific sampling wipe show that the sampling efficiency from woven nylon fabric (e.g., luggage) is 17 ± 4% whereas the efficiency from acrylonitrile butadiene styrene (ABS) plastic (e.g., luggage handles) under the same conditions is 37 ± 6%.

Graphical abstract: New particle-based trace explosive test material produced by drop-on-demand inkjet printing for quantitative wipe-sampling studies

Supplementary files

Article information

Article type
Paper
Submitted
01 Mar 2017
Accepted
08 Apr 2017
First published
21 Apr 2017

Anal. Methods, 2017,9, 3441-3449

New particle-based trace explosive test material produced by drop-on-demand inkjet printing for quantitative wipe-sampling studies

J. R. Verkouteren, J. Lawrence, T. M. Brewer and E. Sisco, Anal. Methods, 2017, 9, 3441 DOI: 10.1039/C7AY00554G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements