Issue 3, 2017

Color tunable dual-phase transparent glass ceramics for warm white light-emitting diodes

Abstract

Currently, Ce3+:Y3Al5O12 phosphor converted white light-emitting diodes suffer from a deficiency of adequate red components and easy aging of the organic silicone matrix. Herein, Ce3+/Mn2+/Si4+:Y3Al5O12 phosphors were synthesized via a traditional solid-state reaction and they can emit intense red luminescence, which is attributed to the Mn2+:4T16A1 spin-forbidden transition under the excitation of blue light via efficient energy transfer from Ce3+ to Mn2+. Temperature-dependent emission spectra and luminescent decay curves evidence that Mn2+ activators partition into both the Al3+ octahedral and Y3+ dodecahedral sites, whereas the Si4+ sites located in the Al3+ tetrahedral site are charge compensators. Furthermore, inorganic Ce3+:Y3Al5O12 and Ce3+/Mn2+/Si4+:Y3Al5O12 dual-phase transparent glass ceramics were successfully fabricated via a low-temperature co-sintering technique to replace the phosphor in organic silicone as a color converter, and red to yellow tunable luminescence can be easily achieved by controlling the content of red phosphor in the glass matrix. Note that by combining the fabricated dual-phase glass ceramics with the InGaN blue chip, warm white light-emitting diodes with a superior optical performance and excellent heat-resistance stability were successfully constructed.

Graphical abstract: Color tunable dual-phase transparent glass ceramics for warm white light-emitting diodes

Article information

Article type
Paper
Submitted
15 Nov 2016
Accepted
14 Dec 2016
First published
15 Dec 2016

J. Mater. Chem. C, 2017,5, 738-746

Color tunable dual-phase transparent glass ceramics for warm white light-emitting diodes

D. Chen, W. Xu, Y. Zhou, J. Zhong and S. Li, J. Mater. Chem. C, 2017, 5, 738 DOI: 10.1039/C6TC04973G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements