Issue 16, 2016

Determination of the sputtering yield of cholesterol using Arn+ and C60+(+) cluster ions

Abstract

The sputtering yield of cholesterol films on silicon wafers is measured using Arn+ and C60+(+) ions in popular energy (E) and cluster size (n) ranges. It is shown that the C60+(+) ions form a surface layer that stabilizes the film so that a well-behaved profile is obtained. On the other hand, the Arn+ gas clusters leave the material very clean but, at room temperature, the layer readily restructures into molecular bilayers, so that, although a useful measure may be made of the sputtering yield, the profiles become much more complex. This restructuring does not occur at room temperature normally but results from the actions of the beams in the sputtering process for profiling in secondary ion mass spectrometry. Better profiles may be made by reducing the sample temperature to −100 °C. This is likely to be necessary for many lower molecular weight materials (below 1000 Da) to avoid the movement of molecules. Measurements for cholesterol films on 37 nm of amiodarone on silicon are even better behaved and show the same sputtering yields at room temperature as those films directly on silicon at −100 °C. The yields for both C60+(+) and Arn+ fit the Universal Equation to a standard deviation of 11%.

Graphical abstract: Determination of the sputtering yield of cholesterol using Arn+ and C60+(+) cluster ions

Article information

Article type
Paper
Submitted
05 Apr 2016
Accepted
08 Jun 2016
First published
08 Jun 2016

Analyst, 2016,141, 4893-4901

Determination of the sputtering yield of cholesterol using Arn+ and C60+(+) cluster ions

P. D. Rakowska, M. P. Seah, J.-L. Vorng, R. Havelund and I. S. Gilmore, Analyst, 2016, 141, 4893 DOI: 10.1039/C6AN00791K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements