Issue 21, 2016

Synthesis and properties of highly branched polybenzimidazoles as proton exchange membranes for high-temperature fuel cells

Abstract

Highly branched polymers applied as low-temperature proton exchange membranes (LTPEMs) have attracted attention from researchers because of their outstanding properties. However, there are few reports on the use of branched polymers as high-temperature proton exchange membranes (HTPEMs). In this work, a series of highly branched polybenzimidazoles (PBIs) with 1,3,5-tri(4-carboxyphenoxy)benzene (B3) as a branching agent were designed and successfully synthesized for the first time. The highly branched PBIs were soluble in polar organic solvents and could be cast to form tough and smooth films. Compared with linear PBI membranes, the branched PBI membranes with a 9% degree of branching exhibited a high phosphoric acid (PA) doping level of 10.5 (PA molecules per repeat unit), high proton conductivity (0.043 S cm−1) at 180 °C under anhydrous conditions, high resistance to oxidation and good PA retention ability. All these properties indicate that branched PBI membranes are promising for HTPEMs and can be potentially used in HTPEM fuel cells.

Graphical abstract: Synthesis and properties of highly branched polybenzimidazoles as proton exchange membranes for high-temperature fuel cells

Supplementary files

Article information

Article type
Paper
Submitted
29 Feb 2016
Accepted
16 Apr 2016
First published
18 Apr 2016

J. Mater. Chem. C, 2016,4, 4814-4821

Synthesis and properties of highly branched polybenzimidazoles as proton exchange membranes for high-temperature fuel cells

J. Ni, M. Hu, D. Liu, H. Xie, X. Xiang and L. Wang, J. Mater. Chem. C, 2016, 4, 4814 DOI: 10.1039/C6TC00862C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements