Issue 48, 2016

Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane

Abstract

3D printed polymer models were applied as templates in order to control channel architectures in monolithic catalysts. The resulting Mn- and Na2WO4-containing monoliths exhibited stable 23–25% methane conversion in the oxidative coupling of methane, with a high selectivity of 67–70% towards C2–C3 hydrocarbons.

Graphical abstract: Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane

Supplementary files

Article information

Article type
Communication
Submitted
05 Oct 2016
Accepted
07 Nov 2016
First published
07 Nov 2016

J. Mater. Chem. A, 2016,4, 18753-18756

Preparation of monolithic catalysts using 3D printed templates for oxidative coupling of methane

P. Michorczyk, E. Hędrzak and A. Węgrzyniak, J. Mater. Chem. A, 2016, 4, 18753 DOI: 10.1039/C6TA08629B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements