Issue 85, 2016, Issue in Progress

Single etch fabrication and characterization of robust nanoparticle tipped bi-level superhydrophobic surfaces

Abstract

Though hierarchical roughness gives the best anti-wetting surfaces, their performance degrades quickly as nanostructures fail even under small mechanical stresses. Using spin coated alumina nanoparticles as an etch mask we report a single-etch based wafer-scale fabrication of robust nanoparticle tipped superhydrophobic surfaces with dual-level roughness. The top-level structures in the dual-level roughness provide mechanical robustness and the surface maintains its liquid repellency even when damaged due to mechanical shear. This complex dual-level structure leads to interesting droplet bouncing dynamics which was studied for several fluids. Though the normalized spread diameter showed good agreement with previous reports, we observed a dependence of contact time on both surface wettability and impact velocity. By breaking the impact event into spreading, recoil and detachment we show that the variation in contact time is mostly in the detachment phase. Contact time variation with impact velocity is attributed to partial impalement of the top-level nanostructures which increases the contact line stiction. For highest impact velocity while water droplets rebound completely, xanthum gum droplets having a similar surface tension and hysteresis leave residual droplets on surfaces with a higher solid fraction which is contrary to the current understanding. A large range of shear-rate dependent viscosity in conjunction with partial impalement explains this new observation.

Graphical abstract: Single etch fabrication and characterization of robust nanoparticle tipped bi-level superhydrophobic surfaces

Supplementary files

Article information

Article type
Paper
Submitted
23 Jun 2016
Accepted
21 Aug 2016
First published
22 Aug 2016

RSC Adv., 2016,6, 81852-81861

Author version available

Single etch fabrication and characterization of robust nanoparticle tipped bi-level superhydrophobic surfaces

A. Tripathy, G. Muralidharan, A. Pramanik and P. Sen, RSC Adv., 2016, 6, 81852 DOI: 10.1039/C6RA16312B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements