Issue 61, 2016, Issue in Progress

Rashba spin–orbit coupling enhanced anomalous Hall effect in MnxSi1−x/SiO2/Si p–i–n junctions

Abstract

Rashba spin–orbit coupling, which allows the manipulation of electron spins in semiconductor heterostructures, has attracted great interest due to its potential applications in spintronic devices. But it is still not clear whether the Rashba spin–orbit coupling in a p–n junction can have a significant effect on the anomalous Hall effect of a p-type ferromagnetic semiconductor film grown on an n-type semiconductor substrate. Here MnxSi1−x/SiO2/Si p–i–n junctions were formed by sputtering p-type MnxSi1−x magnetic semiconductor films on near-intrinsic n-type Si substrates with about 1 nm SiO2 native oxide layer. Although Mn0.48Si0.52/SiO2/Si p–i–n junctions and Mn0.48Si0.52 magnetic semiconductor films grown on insulating glass substrates almost show the same positive anomalous Hall effect at low temperature below 150 K, Mn0.48Si0.52/SiO2/Si p–i–n junctions show a greatly enhanced negative anomalous Hall effect around the temperature of 200 K. On further analysis of the in-plane resistance of Mn0.48Si0.52 films and the IV curves of the p–i–n junctions, the enhanced negative anomalous Hall effect is attributed to the interfacial Rashba spin–orbit coupling in Mn0.48Si0.52/SiO2/Si p–i–n junctions.

Graphical abstract: Rashba spin–orbit coupling enhanced anomalous Hall effect in MnxSi1−x/SiO2/Si p–i–n junctions

Article information

Article type
Paper
Submitted
29 Feb 2016
Accepted
23 May 2016
First published
25 May 2016

RSC Adv., 2016,6, 55930-55935

Rashba spin–orbit coupling enhanced anomalous Hall effect in MnxSi1−x/SiO2/Si p–i–n junctions

A. C. Yang, S. S. Yan, K. Zhang, H. H. Li, J. Pei, L. M. He, Y. F. Tian, Y. F. Qin, S. S. Kang and S. Q. Xiao, RSC Adv., 2016, 6, 55930 DOI: 10.1039/C6RA05340H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements