Issue 40, 2016, Issue in Progress

Synthesis and characterization of hyperbranched polyether imides based on 1,3,5-tris[4-(4′-aminophenoxy)phenoxy]benzene

Abstract

A new triamine monomer 1,3,5-tris[4-(4′-aminophenoxy)phenoxy]benzene, was synthesized by a three step process using hydroquinone, 1-chloro-4-nitrobenzene and 1,3,5-trichlorobenzene. It was successfully polymerized with commercially available dianhydrides [3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and pyromellitic dianhydride (PMDA)] into hyperbranched polyimides (HBPIs) by the A2 + B3 method. Different monomer addition methods and different monomer molar ratios resulted in hyperbranched polyimides with amino and anhydride end groups. The structure of the resulting hyperbranched polyimides were characterized by FT-IR, 1H-NMR, 13C-NMR and mass spectral analysis. All synthesized HBPIs were soluble in most common organic solvents. They also exhibit good thermal stability. The Tg of the HBPIs is in the range of 230–260 °C and T10 values are above 450 °C. The dielectric constant of the synthesized HBPIs is in the range of 3.08–3.29 at 1 MHz and dielectric loss is in the range of 0.65–0.82 at 1 MHz.

Graphical abstract: Synthesis and characterization of hyperbranched polyether imides based on 1,3,5-tris[4-(4′-aminophenoxy)phenoxy]benzene

Article information

Article type
Paper
Submitted
14 Dec 2015
Accepted
18 Mar 2016
First published
24 Mar 2016

RSC Adv., 2016,6, 33249-33258

Author version available

Synthesis and characterization of hyperbranched polyether imides based on 1,3,5-tris[4-(4′-aminophenoxy)phenoxy]benzene

M. F. Rigana, P. Thirukumaran, K. Shanthi and M. Sarojadevi, RSC Adv., 2016, 6, 33249 DOI: 10.1039/C5RA26679C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements