Issue 130, 2015

Upconversion luminescence of cerium-stabilized high temperature phase zirconia phosphors with a high Er3+ doping concentration

Abstract

Oxide upconversion (UC) materials usually have lower luminescence efficiency (LE) due to their low quenching concentration and high phonon energy. To solve this issue, we have investigated in detail cerium-stabilized high temperature phase zirconia based phosphors (Zr(0.85−x)Ce0.15O(2−0.5x):xEr3+) with different doping concentrations of Er3+ and have achieved a red phosphor with an Er3+ concentration as high as 10 mol%, which will have broad prospects for its application as a new UC material. The results demonstrate that adjusting the host structure of the UC material can increase its quenching concentration and thereby the LE will be improved. The introduction of Ce4+ into ZrO2 not only stabilizes its phase but also improves the LE of the ZrO2 based UC material. The Er3+ coordination state changes with an increase of Er3+ concentration in the UC phosphors based on cerium-stabilized zirconia. The corresponding luminescence process translates into the cross relaxation from the excited state absorption, UC luminescence changes from green to red and the red emission intensity becomes stronger and stronger and achieves its maximum when the Er3+ concentration is 10 mol%.

Graphical abstract: Upconversion luminescence of cerium-stabilized high temperature phase zirconia phosphors with a high Er3+ doping concentration

Article information

Article type
Paper
Submitted
09 Oct 2015
Accepted
29 Nov 2015
First published
01 Dec 2015

RSC Adv., 2015,5, 107857-107863

Author version available

Upconversion luminescence of cerium-stabilized high temperature phase zirconia phosphors with a high Er3+ doping concentration

L. Cao, Y. Zhou, W. Xiang, D. Yin, X. Liang, G. Gu and J. Li, RSC Adv., 2015, 5, 107857 DOI: 10.1039/C5RA20941B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements