Issue 127, 2015

Ultrafast UV response detectors based on multi-channel ZnO nanowire networks

Abstract

An UV detector based on multi-channel three dimensional ZnO nanowire networks was fabricated via a catalyst-free CVD method. The ultrafast response time of 20 ms for UV detection was tested in detail. The result revealed that the formation of multi-channels on lateral growth ZnO nanowire arrays can construct a transmission path for UV excited electrons, which is essential for gaining outstanding UV detecting performance. This work not only reports a new way to fabricate in situ nanowire network UV sensors on a chip with large-scale periodic microstructures and a single optical-lithography step via a catalyst free and well controlled synthesis method, but it also confirms a novel mechanism for achieving ultrafast UV detection.

Graphical abstract: Ultrafast UV response detectors based on multi-channel ZnO nanowire networks

Supplementary files

Article information

Article type
Paper
Submitted
13 Oct 2015
Accepted
25 Nov 2015
First published
26 Nov 2015

RSC Adv., 2015,5, 105288-105291

Ultrafast UV response detectors based on multi-channel ZnO nanowire networks

P. He, S. Feng, S. Liu, Q. Li, J. Qi, Z. Zhan, X. Li, Z. Li, J. Shen and W. Lu, RSC Adv., 2015, 5, 105288 DOI: 10.1039/C5RA20910B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements