Issue 118, 2015

Performance of novel a Ag-n-TiO2/PVC reinforced hollow fiber membrane applied in water purification: in situ antibacterial properties and resistance to biofouling

Abstract

To improve the anti-biofouling properties of membranes, Ag-embedded nano-sized titanium dioxide (Ag-n-TiO2) particles were utilized as biocidal agents to modify polyvinyl chloride (PVC) membranes. Both Ag-n-TiO2/PVC flat sheet membranes and reinforced hollow fiber membranes were fabricated by a phase inversion method with varying Ag-n-TiO2 particle concentrations. As a result, the hydrophilicity, permeability, and retention capability increased with Ag-n-TiO2 concentrations from 0 to 1.5 wt%. In addition, the in situ antibacterial and anti-formation of biofilm properties of the modified membranes were greatly enhanced in the conventional inhibition zone test, Escherichia coli (E. coli) absorption experiment, fluorescent staining experiment, as well as long-term continuous biofouling test. The best results were obtained for the PVC membrane modified by 1.0 wt% Ag-n-TiO2. The optimized membrane presented not only better permeability and in situ antibacterial properties in the E. coli adhesion test, but also an enhancement in resisting biofilm formation and a more steady permeation flux in long-term filtration than the unmodified membrane.

Graphical abstract: Performance of novel a Ag-n-TiO2/PVC reinforced hollow fiber membrane applied in water purification: in situ antibacterial properties and resistance to biofouling

Supplementary files

Article information

Article type
Paper
Submitted
06 Sep 2015
Accepted
02 Nov 2015
First published
05 Nov 2015

RSC Adv., 2015,5, 97320-97329

Author version available

Performance of novel a Ag-n-TiO2/PVC reinforced hollow fiber membrane applied in water purification: in situ antibacterial properties and resistance to biofouling

Z. Yu, Y. Zhao, B. Gao, X. Liu, L. Jia, F. Zhao and J. Ma, RSC Adv., 2015, 5, 97320 DOI: 10.1039/C5RA18185B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements