Issue 45, 2015

Vertically self-ordered orientation of nanocrystalline hexagonal boron nitride thin films for enhanced thermal characteristics

Abstract

Vertically self-ordered hexagonal boron nitride (ordered h-BN) is a highly ordered turbostratic BN (t-BN) material similar to hexagonal BN, with its planar structure perpendicularly oriented to the substrate. The ordered h-BN thin films were grown using a High Power Impulse Magnetron Sputtering (HiPIMS) system with a lanthanum hexaboride (LaB6) target reactively sputtered in nitrogen gas. The best vertical alignment was obtained at room temperature, with a grounded bias and a HiPIMS peak power density of 60 W cm−2. Even though the film contains up to 7.5 at% lanthanum, it retains its highly insulative properties and it was observed that an increase in compressive stress is correlated to an increase in film ordering quality. Importantly, the thermal conductivity of vertically ordered h-BN is considerably high at 5.1 W m−1 K−1. The favourable thermal conductivity coupled with the dielectric properties of this novel material and the low temperature growth could outperform SiO2 in high power density electronic applications.

Graphical abstract: Vertically self-ordered orientation of nanocrystalline hexagonal boron nitride thin films for enhanced thermal characteristics

Supplementary files

Article information

Article type
Paper
Submitted
27 Jul 2015
Accepted
12 Oct 2015
First published
13 Oct 2015

Nanoscale, 2015,7, 18984-18991

Vertically self-ordered orientation of nanocrystalline hexagonal boron nitride thin films for enhanced thermal characteristics

O. Cometto, B. Sun, S. H. Tsang, X. Huang, Y. K. Koh and E. H. T. Teo, Nanoscale, 2015, 7, 18984 DOI: 10.1039/C5NR05009J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements