Issue 45, 2015

Temperature and electric field induced phase transition in [110]C-oriented 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystals

Abstract

Temperature-dependent domain configurations were studied for both unpoled and poled [110]C-oriented 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 (PMN–0.37PT) single crystals by polarized light microscopy (PLM). Combining the dielectric properties and the domain configurations upon heating, it was found that the temperature-induced phase transition in the unpoled [110]C-oriented PMN–0.37PT single crystal followed the tetragonal (T) → cubic (C) sequence. However, under an electric (E) field of 10 kV cm−1 along the [110]C direction, a single domain orthorhombic (O) phase was induced. The E field-dependent domain structures were observed in situ under PLM, which verified that the T phase turned to O phase when an E field of 10 kV cm−1 was applied along the [110]C direction. Upon subsequent heating, the phase transition followed the O → T → C sequence. The O–T discontinuous phase transition led to a remarkable change in the dielectric coefficient and strain with increasing temperature. The strain at 45 °C (0.148%) was 2.2 times larger than that at room temperature (0.068%), accompanied by a tremendous piezoelectric coefficient (Image ID:c5ce01738f-t1.gif ~1645 pm V−1).

Graphical abstract: Temperature and electric field induced phase transition in [110]C-oriented 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystals

Article information

Article type
Paper
Submitted
30 Aug 2015
Accepted
08 Oct 2015
First published
08 Oct 2015

CrystEngComm, 2015,17, 8664-8670

Author version available

Temperature and electric field induced phase transition in [110]C-oriented 0.63Pb(Mg1/3Nb2/3)O3–0.37PbTiO3 single crystals

W. He, Q. Li, N. Luo, Y. Zhang and Q. Yan, CrystEngComm, 2015, 17, 8664 DOI: 10.1039/C5CE01738F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements