Issue 15, 2015

A novel aptasensor based on single-molecule force spectroscopy for highly sensitive detection of mercury ions

Abstract

We have developed a novel aptasensor based on single-molecule force spectroscopy (SMFS) capable of detecting mercury ions (Hg2+) with sub-nM sensitivity. The single-strand (ss) DNA aptamer used in this work is rich in thymine (T) and readily forms T–Hg2+–T complexes in the presence of Hg2+. The aptamer was conjugated to an atomic force microscope (AFM) probe, and the adhesion force between the probe and a flat graphite surface was measured by single-molecule force spectroscopy (SMFS). The presence of Hg2+ ions above a concentration threshold corresponding to the affinity constant of the ions for the aptamer (about 5 × 109 M−1) could be easily detected by a change of the measured adhesion force. With our chosen aptamer, we could reach an Hg2+ detection limit of 100 pM, which is well below the maximum allowable level of Hg2+ in drinking water. In addition, this aptasensor presents a very high selectivity for Hg2+ over other metal cations, such as K+, Ca2+, Zn2+, Fe2+, and Cd2+. Furthermore, the effects of the ionic strength and loading rate on the Hg2+ detection were evaluated. Its simplicity, reproducibility, high selectivity and sensitivity make our SMFS-based aptasensor advantageous with respect to other current Hg2+ sensing methods. It is expected that our strategy can be exploited for monitoring the pollution of water environments and the safety of potentially contaminated food.

Graphical abstract: A novel aptasensor based on single-molecule force spectroscopy for highly sensitive detection of mercury ions

Article information

Article type
Paper
Submitted
13 Apr 2015
Accepted
28 May 2015
First published
28 May 2015

Analyst, 2015,140, 5243-5250

A novel aptasensor based on single-molecule force spectroscopy for highly sensitive detection of mercury ions

Q. Li, M. Michaelis, G. Wei and L. Colombi Ciacchi, Analyst, 2015, 140, 5243 DOI: 10.1039/C5AN00708A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements