Issue 16, 2014

Self-assembled WO3−x hierarchical nanostructures for photothermal therapy with a 915 nm laser rather than the common 980 nm laser

Abstract

Photothermal therapy (PTT) is limited by unsuitable photothermal agents and near-infrared (NIR) light. Herein, self-assembled PEGylated WO3−x hierarchical nanostructures, which could serve as excellent laser-cavity mirrors, were successfully prepared via a simple one-pot solvothermal route. The as-prepared WO3−x hierarchical nanostructures displayed strong near-infrared absorption. The absorption of pure water at 980 nm is 30 times higher than that at 915 nm, and the temperature of water only increased by 3.4 °C under the irradiation of a 915 nm laser with a power density of 1.0 W cm−2 for 10 min, while the temperature of water increased as much as 15.1 °C for the 980 nm laser. With continuous excitation by 915 nm light, the photothermal conversion efficiency of these WO3−x hierarchical nanostructures was evaluated to be 28.1%. Thus, the WO3−x hierarchical nanostructures could serve as excellent laser-cavity mirrors of a 915 nm laser. The PTT study on cancer cells in vivo demonstrated that the WO3−x hierarchical nanostructures can generate enough heat for efficient photothermal therapy of cancer cells under the irradiation of a 915 nm laser with a power density of 1.2 W cm−2 over a short period (5–10 min).

Graphical abstract: Self-assembled WO3−x hierarchical nanostructures for photothermal therapy with a 915 nm laser rather than the common 980 nm laser

Supplementary files

Article information

Article type
Paper
Submitted
03 Dec 2013
Accepted
05 Feb 2014
First published
05 Feb 2014

Dalton Trans., 2014,43, 6244-6250

Self-assembled WO3−x hierarchical nanostructures for photothermal therapy with a 915 nm laser rather than the common 980 nm laser

B. Li, Y. Zhang, R. Zou, Q. Wang, B. Zhang, L. An, F. Yin, Y. Hua and J. Hu, Dalton Trans., 2014, 43, 6244 DOI: 10.1039/C3DT53396D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements