Issue 12, 2014

Kinetics of the catalytic cracking of naphtha over ZSM-5 zeolite: effect of reduced crystal size on the reaction of naphthenes

Abstract

The catalytic cracking of model naphthenes (cyclohexane and methylcyclohexane) over ZSM-5 zeolites of different crystal sizes (macro- and nano-ZSM-5) was examined at reaction temperatures ranging from 748 to 923 K under atmospheric pressure, focusing on the associated reaction rate constants and activation energies. The catalytic cracking was found to follow first-order kinetics with respect to the naphthene concentrations and the activation energies for cyclohexane and methylcyclohexane cracking over nano-ZSM-5 were determined to be 119 and 116 kJ mol−1, respectively. In order to elucidate the rate-limiting step in the cracking process, the Thiele modulus and the effectiveness factor obtained from cracking over the two ZSM-5 zeolites were evaluated. Cracking with nano-ZSM-5 proceeded under reaction-limiting conditions, whereas the reaction over macro-ZSM-5 at 923 K took place under transition conditions between reaction- and diffusion-limiting. Nano-ZSM-5 was applied to the catalytic cracking of a model naphtha and the results demonstrated that this catalyst was both effective and stable and generated a high yield of light olefins.

Graphical abstract: Kinetics of the catalytic cracking of naphtha over ZSM-5 zeolite: effect of reduced crystal size on the reaction of naphthenes

Article information

Article type
Paper
Submitted
04 Jun 2014
Accepted
15 Jul 2014
First published
16 Jul 2014

Catal. Sci. Technol., 2014,4, 4265-4273

Author version available

Kinetics of the catalytic cracking of naphtha over ZSM-5 zeolite: effect of reduced crystal size on the reaction of naphthenes

H. Konno, R. Ohnaka, J. Nishimura, T. Tago, Y. Nakasaka and T. Masuda, Catal. Sci. Technol., 2014, 4, 4265 DOI: 10.1039/C4CY00733F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements