H2 production through electro-oxidation of SO2: identifying the fundamental limitations

Abstract

Sulphur dioxide (SO₂), a known industrial pollutant and pulmonary irritant, is emitted to the atmosphere in excess of 120 Mt per annum. Great strides have been taken to reduce SO₂ emissions, but with the growth of specifically China, and to a lesser extent India, it is on the rise again. The electrolysis of aqueous solutions of dissolved SO₂ holds huge environmental potential in that SO₂ is converted to sulphuric acid (H₂SO₄) and at the same time hydrogen gas is produced. A further benefit or incentive is that a sulphur depolarised electrolyser (SDE) operates at an applied potential that is about one volt lower than that of a regular water electrolyser. In taking this technology forward the greatest improvement to be made is in developing a suitable electrocatalyst, which is also the ‘lowest hanging fruit’ in that very limited research and development has been conducted on the electrocatalyst for this process. In this work, density functional theory is employed to model the electro-oxidation of SO₂ on single crystal planes of the 4d and 5d transition metals. Two reaction mechanisms are considered, a HSO₃ intermediate pathway and a SO₃ intermediate pathway. The binding energies of all intermediates are found to scale with the surface reactivity (measured as the adsorption of OH). Irrespective of the pathway water needs to be activated and reduction of SO₂ to elemental sulphur must be avoided. This requirement alone calls for an electrode potential of at least 0.7–0.8 V for all the investigated transition metals and thus challenges the proclaimed goal to operate the SDE at 0.6 V. A high chemical barrier is further found to severely limit the oxidation reaction on reactive metals. A much higher catalytic activity can be obtained on precious metals but at the cost of running the reaction at high overpotentials.