Issue 14, 2013

Chitosan and chitosan–ZnO-based complex nanoparticles: formation, characterization, and antibacterial activity

Abstract

Nanostructured chitosan (CS) and a chitosan–Zn based (Zn–CS) complex have been synthesized and simultaneously deposited on cotton fabrics using ultrasound. SEM measurements revealed that the coating consists of nanoparticles (NPs) of ca. 40 nm in diameter, homogeneously dispersed along the yarns. XANES studies pointed out that the complex consisted of a less than 2.1 nm ZnO core to which the chitosan was bonded. Additionally, FTIR measurements indicated the in situ formation of a Zn–CS complex which is the only deposited material on the cotton surface. The antibacterial properties of the CS and Zn–CS coated textiles were tested against Gram positive and Gram negative bacteria species. More than two-fold increase of the antibacterial activity of Zn–CS NP coated textiles was detected as compared to the fabrics treated with the sonochemically synthesized CS NPs alone. The sonochemical technique appears to be a suitable method for producing organic NPs of soluble compounds, without loss of their intrinsic properties, i.e. the antimicrobial activity of chitosan. Moreover, hybrid nanoorganometallic particles were simultaneously synthesized and deposited on cotton sonochemically.

Graphical abstract: Chitosan and chitosan–ZnO-based complex nanoparticles: formation, characterization, and antibacterial activity

Article information

Article type
Paper
Submitted
20 Dec 2012
Accepted
04 Feb 2013
First published
04 Feb 2013

J. Mater. Chem. B, 2013,1, 1968-1976

Chitosan and chitosan–ZnO-based complex nanoparticles: formation, characterization, and antibacterial activity

I. Perelshtein, E. Ruderman, N. Perkas, T. Tzanov, J. Beddow, E. Joyce, T. J. Mason, M. Blanes, K. Mollá, A. Patlolla, A. I. Frenkel and A. Gedanken, J. Mater. Chem. B, 2013, 1, 1968 DOI: 10.1039/C3TB00555K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements