Taking the place of perylene diimide: perylene tetracarboxylic tetraester as a building block for polymeric acceptors to achieve higher open circuit voltage in all-polymer bulk heterojunction solar cells†
Abstract
As strong
* Corresponding authors
a
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan 430070, P. R. China
E-mail:
shengqiang@whut.edu.cn
Fax: +86 27 87879468
Tel: +86 27 87870537
b WUT-USG Joint Laboratory of Advanced Optoelectronic Materials and Devices, State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, P. R. China and Institute of Photonics, University of Strathclyde, Glasgow, UK
c Center for Chemical and Material Engineering, Wuhan University of Technology, Wuhan 430070, P. R. China
d Department of Applied Chemistry, School of Science, Wuhan University of Technology, Wuhan, P. R. China
As strong
Y. Jiang, L. Lu, M. Yang, C. Zhan, Z. Xie, F. Verpoort and S. Xiao, Polym. Chem., 2013, 4, 5612 DOI: 10.1039/C3PY00938F
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content