Issue 30, 2013

Molten salt synthesis of tetragonal LiYF4:Yb3+/Ln3+ (Ln = Er, Tm, Ho) microcrystals with multicolor upconversion luminescence

Abstract

Well-defined tetragonal LiYF4:Yb3+/Ln3+ (Ln = Er, Tm, Ho) microcrystals were successfully prepared by a surfactant-free molten salt method for the first time. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), and photoluminescence (PL) spectra were used to characterize the samples. It is found that with prolonged time, the phase of product transforms from orthorhombic YF3 through hexagonal NaYF4 to tetragonal LiYF4, while the morphology changes from nanoparticles via microtubes to micro-sized bi-pyramids. By changing the dopant species (Ln3+), multicolor (yellow, green, and blue) upconversion (UC) emissions can be obtained in LiYF4:Yb3+/Ln3+ under 980 nm laser diode (LD) excitation. The UC mechanisms in co-doped LiYF4 samples were analyzed in detail based on the emission spectra. Importantly, this synthetic methodology may offer a new alternative in the fabrication of high quality rare earth fluorides and open the possibility to meet the increasing commercial demand.

Graphical abstract: Molten salt synthesis of tetragonal LiYF4:Yb3+/Ln3+ (Ln = Er, Tm, Ho) microcrystals with multicolor upconversion luminescence

Supplementary files

Article information

Article type
Paper
Submitted
17 Mar 2013
Accepted
24 May 2013
First published
24 May 2013

CrystEngComm, 2013,15, 6015-6021

Molten salt synthesis of tetragonal LiYF4:Yb3+/Ln3+ (Ln = Er, Tm, Ho) microcrystals with multicolor upconversion luminescence

M. Ding, C. Lu, L. Cao, W. Huang, Y. Ni and Z. Xu, CrystEngComm, 2013, 15, 6015 DOI: 10.1039/C3CE40477C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements