Issue 3, 2013

Sequential injection lab-on-valve platform as a miniaturisation tool for solid phase extraction

Abstract

There is a growing interest in the possibility to perform pre-concentration of analyte and its derivatization with the aim of eliminating interferences, to increase the sensitivity and selectivity of analytical methodologies. The manipulation of the solid phase in conventional analysis may involve the use of relatively large amounts of solid phase. This limitation can be minimized by manipulation in flow systems through the bead injection approach. In this scenario, sequential injection lab-on-valve (SI-LOV) platform has proved to be a powerful tool in the automation of solid phase extraction, and is reviewed in this paper.

Graphical abstract: Sequential injection lab-on-valve platform as a miniaturisation tool for solid phase extraction

Article information

Article type
Critical Review
Submitted
20 Sep 2012
Accepted
21 Nov 2012
First published
21 Nov 2012

Anal. Methods, 2013,5, 585-597

Sequential injection lab-on-valve platform as a miniaturisation tool for solid phase extraction

S. S. M. P. Vidigal, I. V. Tóth and A. O. S. S. Rangel, Anal. Methods, 2013, 5, 585 DOI: 10.1039/C2AY26322J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements