Issue 9, 2013

Sensitive and selective electrochemical detection of dopamine using an electrode modified with carboxylated carbonaceous spheres

Abstract

A highly sensitive and selective electrochemical sensor of dopamine (DA) has been developed by employing carboxylated carbonaceous spheres to modify glassy carbon electrodes (GCEs). Scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy were used to characterize as-prepared carbonaceous spheres. The results show that the diameter of carboxylated carbonaceous spheres is uniformly 500 nm and that their surfaces mainly expose carboxyl groups with negative charges. Electrochemical measurements demonstrate that carboxylated carbonaceous spheres greatly improve the accumulation of positively charged dopamine, leading to good sensing performance on a modified GCE. Through applying the differential pulse voltammetric approach, linear calibration curves were obtained in a range of about 0.1 to 40 μM with a detection limit down to 30 nM. Furthermore, depending on the charge-based discrimination, the modified electrode displays good selective detection of DA and reliable anti-interference to UA and glucose besides a weak and negligible response to AA. Therefore, the carboxylated carbonaceous sphere introduced here is a good candidate to develop electrochemical sensors for the sensitive and selective detection of DA.

Graphical abstract: Sensitive and selective electrochemical detection of dopamine using an electrode modified with carboxylated carbonaceous spheres

Supplementary files

Article information

Article type
Paper
Submitted
12 Nov 2012
Accepted
23 Feb 2013
First published
25 Feb 2013

Analyst, 2013,138, 2683-2690

Sensitive and selective electrochemical detection of dopamine using an electrode modified with carboxylated carbonaceous spheres

Z. Guo, M. Seol, M. Kim, J. Ahn, Y. Choi, J. Liu and X. Huang, Analyst, 2013, 138, 2683 DOI: 10.1039/C3AN36669C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements