Issue 17, 2013

Fast detection of atrazine in corn using thermometric biosensors

Abstract

Fast detection is important in screening large-scale samples. This study establishes a direct competitive ELISA method (dcTELISA) based on an enzyme thermistor for fast atrazine (ATZ) detection. ATZ competes with β-lactamase-labeled ATZ (ATZ–E) for the binding sites on anti-ATZ monoclonal antibody (mAb). The mAb are covalently bound to Controlled Pore Glass (CPG) in an immunoreactor to form immunocomplexes with ATZ and ATZ–E. Several parameters of biosensor performance were optimized, such as the ATZ–E concentration, concentration and nature of the substrate, flow rate, and effect of temperature on the sensor response. After optimization, the assay time for a single sample was 12 min. The work process and result were compared with those of high-performance liquid chromatography (HPLC). The detection results exhibited a recovery rate of 88% to 107% in ATZ-spiked fresh cut corn stalks and silage samples. The results obtained via dcTELISA had good correlation with that of HPLC, and the biosensor response was reproducible and stable even when used continuously for over 4 months. All these properties suggested that the fast detection method, dcTELISA, may be used to detect pesticide residue in large-scale samples.

Graphical abstract: Fast detection of atrazine in corn using thermometric biosensors

Article information

Article type
Paper
Submitted
12 Mar 2013
Accepted
05 May 2013
First published
08 May 2013

Analyst, 2013,138, 5151-5156

Fast detection of atrazine in corn using thermometric biosensors

Z. Qie , B. Ning , M. Liu, J. Bai, Y. Peng, N. Song, Z. Lv, Y. Wang, S. Sun, X. Su, Y. Zhang and Z. Gao, Analyst, 2013, 138, 5151 DOI: 10.1039/C3AN00490B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements