Issue 32, 2012

Effect of a non-volatile cosolvent on crack patterns induced by desiccation of a colloidal gel

Abstract

The consolidation of colloidal gels results in enormous stresses that are usually released by the formation of undesirable cracks. The capacity of a gel network to crack during drying depends on the existence and significance of a pressure gradient in the pore liquid; in addition it depends on the way the gel relaxes the resulting drying stresses. In this paper the effect of a binary mixture of solvents saturating the gel network on the crack patterns formation is investigated. Indeed, incorporation of a small quantity of non-volatile cosolvent, i.e. glycerol, inhibits drying-induced cracks; moreover addition of a concentration greater than 10% to a colloidal dispersion leads to a crack free coating under room conditions. Mass variation with time reveals that both evaporation rate and cracking time are not affected by glycerol, in the range of added glycerol contents studied. In addition measurements of mechanical properties show that the elastic modulus is reduced with glycerol content. The decrease of the number of cracks with the glycerol content is related to the flattening of the pressure gradient in the pore liquid. The mechanism is shown to be due to the combination of two processes: flow driven by the pressure gradient and diffusion mechanisms in accordance with Scherer's work (1989).

Graphical abstract: Effect of a non-volatile cosolvent on crack patterns induced by desiccation of a colloidal gel

Article information

Article type
Paper
Submitted
22 Mar 2012
Accepted
07 Jun 2012
First published
06 Jul 2012

Soft Matter, 2012,8, 8505-8510

Effect of a non-volatile cosolvent on crack patterns induced by desiccation of a colloidal gel

F. Boulogne, L. Pauchard and F. Giorgiutti-Dauphiné, Soft Matter, 2012, 8, 8505 DOI: 10.1039/C2SM25663K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements