Microstructuring of polymer films for sensitive genotyping by real-time PCR on a centrifugal microfluidic platform
Abstract
We present a novel process flow enabling prototyping of microfluidic cartridges made out of
Maintenance work is planned from 21:00 BST on Tuesday 20th August 2024 to 21:00 BST on Wednesday 21st August 2024, and on Thursday 29th August 2024 from 11:00 to 12:00 BST.
During this time the performance of our website may be affected - searches may run slowly, some pages may be temporarily unavailable, and you may be unable to log in or to access content. If this happens, please try refreshing your web browser or try waiting two to three minutes before trying again.
We apologise for any inconvenience this might cause and thank you for your patience.
* Corresponding authors
a
Laboratory for MEMS Applications, Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Koehler-Allee 106, Freiburg, Germany
E-mail:
zengerle@imtek.de
b Laboratory for Process Technology, Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges-Koehler-Allee 106, Freiburg, Germany
c Centre for Biological Signalling Studies (bioss), University of Freiburg, Germany
d HSG-IMIT, Wilhelm-Schickard-Straße 10, Villingen-Schwenningen, Germany
e Genomic Research Laboratory, University of Geneva Hospitals, Rue Gabrielle-Perret-Genti 4, Geneva 14, Switzerland
f Clinical Microbiology Laboratory, University of Geneva Hospitals, Rue Gabrielle-Perret-Genti 4, Geneva 14, Switzerland
We present a novel process flow enabling prototyping of microfluidic cartridges made out of
M. Focke, F. Stumpf, B. Faltin, P. Reith, D. Bamarni, S. Wadle, C. Müller, H. Reinecke, J. Schrenzel, P. Francois, D. Mark, G. Roth, R. Zengerle and F. von Stetten, Lab Chip, 2010, 10, 2519 DOI: 10.1039/C004954A
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content