Issue 4, 2009

Interfaces for capillary LC with ICPMS detection: A comparison of nebulizers/spray chamber configurations

Abstract

Three nebulizer and four spray chamber configurations were evaluated to develop a selective and sensitive capillary interface to analyze phosphorothioate oligonucleotides by ICPMS. Nebulizers consisted of two of the most common low flow nebulizer designs, concentric and micro-concentric. Spray chambers utilized were a Scott chamber, a Cinnabar chamber, and two single pass configurations, all with different internal volumes. The influence of nebulizer designs and spray chamber volumes were determined by peak width measurements through flow injections made with and without the capillary column. This study capitalizes on the element specific detection abilities of ICPMS by elucidating phosphorus and sulfur in the phosphorothioate linkage of the 24 mer oligonucleotide by monitoring 31P+ and 32S+. Comparisons of nebulizer/spray chamber responses were based upon absolute sensitivity for the 24 mer oligonucleotide. Micro-flow injection analysis generated absolute detection limits of 31P and 32S of 0.17 pg and 0.16 pg, respectively, corresponding to 16 fmol of 24 mer oligonucleotide injected. This is the first record of a phosphorothioate oligonucleotide being quantitatively detected by ICPMS and the subsequent evaluation of low flow capillary nebulizer/spray chamber configurations optimized for its analysis.

Graphical abstract: Interfaces for capillary LC with ICPMS detection: A comparison of nebulizers/spray chamber configurations

Article information

Article type
Technical Note
Submitted
12 Nov 2008
Accepted
09 Feb 2009
First published
09 Mar 2009

J. Anal. At. Spectrom., 2009,24, 528-534

Interfaces for capillary LC with ICPMS detection: A comparison of nebulizers/spray chamber configurations

K. E. Lokits, P. A. Limbach and J. A. Caruso, J. Anal. At. Spectrom., 2009, 24, 528 DOI: 10.1039/B820121H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements