Issue 5, 2008

An in situ amperometric biosensor for the detection of vapours from explosive compounds

Abstract

An amperometric biosensor based on genetically-modified enzymes was used for the in situdetection of trace vapours from a number of explosive compounds. The vapour samples that were generated from a purpose-built vapour generator were collected and pre-concentrated using a trap able to concentrate samples at a rate of 60-fold per minute of sampling. The amperometric biosensor achieved a remarkably low vapour detection limit of 6 parts per trillion from a room temperature sample. The specific activity of the reported enzyme toward a number of explosive compounds was also confirmed using absorbance measurements.

Graphical abstract: An in situ amperometric biosensor for the detection of vapours from explosive compounds

Article information

Article type
Paper
Submitted
30 Aug 2007
Accepted
20 Nov 2007
First published
30 Nov 2007

Analyst, 2008,133, 621-625

An in situ amperometric biosensor for the detection of vapours from explosive compounds

C. D. Gwenin, M. Kalaji, C. M. Kay, P. A. Williams and D. N. Tito, Analyst, 2008, 133, 621 DOI: 10.1039/B713269G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements