Issue 10, 2006

Behaviour of a flow focusing pneumatic nebulizer with high total dissolved solids solution on radially- and axially-viewed inductively coupled plasma atomic emission spectrometry

Abstract

A new flow focusing pneumatic nebulizer (FFPN) is evaluated for the analysis of high salt content samples. The analytical performance for axially and radially viewed ICP-AES analysis is presented for the FFPN and compared with that of a commercially available Sea Spray nebulizer (SSN). Figures of merit such as sensitivity, precision and limits of detection, obtained with a multi-element standard solution containing 2% NaCl, are used to compare both nebulizers. In general, the sensitivity, precision and limits of detection obtained with the FFPN are similar to or better than those obtained with the SSN, but the latter nebulizer is working at a liquid uptake rate five times higher. Long term stability and blockage tests carried out with the FFPN demonstrate that, due to its special design and working principle, this nebulizer is capable of continuous operation with high salt content (3%) solutions without clogging or degradation of the analytical signal.

Graphical abstract: Behaviour of a flow focusing pneumatic nebulizer with high total dissolved solids solution on radially- and axially-viewed inductively coupled plasma atomic emission spectrometry

Article information

Article type
Technical Note
Submitted
10 May 2006
Accepted
31 Jul 2006
First published
18 Aug 2006

J. Anal. At. Spectrom., 2006,21, 1072-1075

Behaviour of a flow focusing pneumatic nebulizer with high total dissolved solids solution on radially- and axially-viewed inductively coupled plasma atomic emission spectrometry

B. Almagro, A. M. Gañán-Calvo, M. Hidalgo and A. Canals, J. Anal. At. Spectrom., 2006, 21, 1072 DOI: 10.1039/B606621F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements