Issue 9, 2006

Interferometric droplet imaging for in situ aerosol characterization in an inductively coupled plasma

Abstract

Size, velocity and evaporation rate of droplets in an Ar inductively coupled plasma (ICP) are simultaneously measured for the first time using a novel laser based imaging technique. In interferometric droplet imaging (IDI), an interference pattern created by the reflected and refracted rays from a droplet are collected in an out-of-focus image. The droplet diameter is determined by counting the number of fringes in the collected interference pattern. Combination of IDI and particle tracking velocimetry (PTV) provides the capability of monitoring droplet properties during the journey inside ICP. Using a demountable-direct injection high efficiency nebulizer, droplets in the range of 3–30 μm in diameter traveling at 15–70 m s−1 are observed in the analytical zone of the ICP. The upper velocity threshold for surviving droplets is determined by the nebulizer gas flow rate, whereas the lower threshold is mainly influenced by thermal expansion of the plasma gas. Droplet evaporation rates (0.26–0.36 mm2 s−1) are in good agreement with other reports and theoretical simulations for droplets in a 3000 K Ar environment.

Graphical abstract: Interferometric droplet imaging for in situ aerosol characterization in an inductively coupled plasma

Article information

Article type
Paper
Submitted
27 Mar 2006
Accepted
23 May 2006
First published
05 Jun 2006

J. Anal. At. Spectrom., 2006,21, 839-846

Interferometric droplet imaging for in situ aerosol characterization in an inductively coupled plasma

K. Jorabchi, R. G. Brennan, J. A. Levine and A. Montaser, J. Anal. At. Spectrom., 2006, 21, 839 DOI: 10.1039/B604403D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements