Volume 131, 2006

Strong electronic coupling between single C60 molecules and gold electrodes prepared by quench condensation at 4 K. A single molecule three terminal device study

Abstract

We report the first measurements of single C60 molecules trapped in three terminal devices prepared by quench condensation of a gold source and drain electrode on top of an aluminium gate electrode covered with a thin oxide. Our experimental platform allows the source and drain electrodes to be fabricated on the gate oxide at low temperatures and in high vacuum. In a subsequent step, single molecules are evaporated in situ onto the surface and caught in the gap between a source and a drain electrode. This fabrication method ensures a clean contact between the molecule and the gold electrode due to the unbroken vacuum. Our measurements reveal a strong interaction between the C60 molecule and the gold electrodes resulting in the absence of the Coulomb blockade effects observed by others. In addition, we observe an insignificant gate dependence but a pronounced negative differential resistance (NDR) at bias voltages from 20–50 meV. The position of the peak in the NDR shows a pronounced and universal temperature dependence for all six devices included in the study. The results are related to previous measurements in such devices which focus on the detailed nature of the contact region between the molecule and the gold electrode.

Article information

Article type
Paper
Submitted
11 May 2005
Accepted
29 Jun 2005
First published
23 Sep 2005

Faraday Discuss., 2006,131, 337-345

Strong electronic coupling between single C60 molecules and gold electrodes prepared by quench condensation at 4 K. A single molecule three terminal device study

A. V. Danilov, S. E. Kubatkin, S. G. Kafanov and T. Bjørnholm, Faraday Discuss., 2006, 131, 337 DOI: 10.1039/B506679B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements