Issue 8, 2003

Advances in U-Pb geochronology using a frequency quintupled Nd:YAG based laser ablation system (λ = 213 nm) and quadrupole based ICP-MS

Abstract

The analytical potential of a 213 nm laser system coupled to a quadrupole based ICP-MS for U-Pb dating of zircon is investigated. The study was performed on zircons from a Neoproterozoic granitoid of the Cadomian belt of Brittany. Seven zircon fractions of the same sample including two single grains were dated by ID-TIMS to obtain a reference age and error to evaluate the accuracy and precision of LA-ICP-MS U-Pb results. The best estimate for the age of crystallisation obtained by ID-TIMS is 603 ± 2 Ma. LA-ICP-MS analyses were conducted in two sessions, one using only Ar as carrier gas and one using Ar + He. In both cases the age results are within analytical uncertainty of the ID-TIMS age (601 ± 9 Ma for the Ar analyses and 600 ± 2 Ma for the He analyses). It is demonstrated that the use of He carrier gas significantly improves reproducibility and precision of the elemental U-Pb ratios and allows the collection of data with a 2σ relative precision < ca. 1.5% for 206Pb/238U ratios and < ca. 2.5% for 207Pb/206Pb ratios at ca. 25 × 35 µm sample resolution. It is also demonstrated that the various sources of uncertainty associated with LA-ICP-MS U-Pb dating do not preclude the possibility of obtaining precise and accurate age results if an appropriate methodology is applied.

Article information

Article type
Paper
Submitted
23 Jan 2003
Accepted
23 May 2003
First published
09 Jul 2003

J. Anal. At. Spectrom., 2003,18, 847-855

Advances in U-Pb geochronology using a frequency quintupled Nd:YAG based laser ablation system (λ = 213 nm) and quadrupole based ICP-MS

T. E. Jeffries, J. Fernandez-Suarez, F. Corfu and G. Gutierrez Alonso, J. Anal. At. Spectrom., 2003, 18, 847 DOI: 10.1039/B300929G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements