Issue 9, 2002

Oxidation behavior of Ti3AlC2 powders in flowing air

Abstract

The oxidation behavior of Ti3AlC2 powders has been investigated in air by means of simultaneous TGA-DSC, XRD, Raman spectra, SEM, EDS and BET specific surface measurement to understand the intrinsic oxidation behavior of this newly developed ternary compound. The starting and complete oxidation temperatures determined by simultaneous TGA-DSC were 400 and 1120 °C, respectively. These temperatures are higher than those for TiC, suggesting that Ti3AlC2 is more oxidation resistant than TiC. An anomalous oxidation temperature range of 550–650 °C in which the final mass gains due to the isothermal oxidation of Ti3AlC2 powders at 550, 600 and 650 °C for 2 h are significantly greater than that at a higher temperature of 700 °C, was observed. This anomalous oxidation behavior suggests that direct reaction dominated with high oxidation kinetics in this temperature range, which was confirmed by SEM morphology observation and BET specific surface area measurement. The oxidation of Ti3AlC2 powders at temperatures below 700 °C resulted in two modifications of TiO2 (anatase and rutile). At temperatures above 800 °C the oxidation products consisted of rutile TiO2 and α-Al2O3.

Graphical abstract: Oxidation behavior of Ti3AlC2 powders in flowing air

Article information

Article type
Paper
Submitted
15 Apr 2002
Accepted
11 Jun 2002
First published
02 Aug 2002

J. Mater. Chem., 2002,12, 2781-2785

Oxidation behavior of Ti3AlC2 powders in flowing air

X. H. Wang and Y. C. Zhou, J. Mater. Chem., 2002, 12, 2781 DOI: 10.1039/B203644D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements