Study on flame retardancy of EPDM reinforced by ammonium polyphosphate

Abstract

Currently, the most widely used material for solid rocket motor (SRM) insulation is ethylene propylene diene monomer (EPDM) filled with flame-retardant and ablation-resistant fillers. Researchers have been working hard to find a flame-retardant filler that can simultaneously meet the complex requirements of mechanical strength, density, flame retardancy and ablative performance of the insulation layer. This requires research on the flame retardant properties of flame retardants in oxygen-poor environments. In this paper, ammonium polyphosphate (APP) is used as a flame retardant filler, which is filled into an EPDM premix (p-EPDM) containing fumed silica and aluminum hydroxide to prepare composite materials. By creating an anoxic environment, the flame retardant behavior of APP under anoxic conditions on EPDM was studied. The results show that composites prepared with APP show better flame retardant properties in tests such as limiting oxygen index and UL-94, with less impact on mechanical strength and density. The surface morphology and elemental composition of the composite combustion residues were studied using Raman spectroscopy, scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS). In an oxygen-depleted environment, APP will thermally decompose to form ammonia, water vapor and phosphorus-containing acidic substances. These gases dilute the flammable gas and reduce the thermal conductivity. The acidic substances containing phosphorus are concentrated on the surface of the pyrolysis layer to promote the formation of the carbon layer. This provides guidance for us to design insulation layer materials with properties that are more in line with actual use requirements.