Issue 72, 2019, Issue in Progress

Er3+/Yb3+ co-doped nanocrystals modified with 6-aminocaproic acid for temperature sensing in biomedicine

Abstract

We report β-PbF2:Er3+/Yb3+ nanocrystals (NCs) modified with 6-aminocaproic acid (6AA) via wet chemical etching of glass ceramics (GCs). NCs body-doped with trivalent rare-earth (RE3+) ions were released from the GCs by etching of the glass matrix and modified with bifunctional 6AA ligands to enhance their water solubility. They have good stability in water with an average diameter of 56 nm and display efficient green (521, 550 nm) and red (660 nm) emission under the excitation of a 940 nm laser. High absolute sensitivity (SA) and relative sensitivity (SR) (0.0027 K−1 and 1.18% K−1, respectively) and high resolution (0.25 K) were achieved for temperature sensing in the biological temperature range, using the fluorescence intensity ratio (FIR) technique. All of the experimental results indicate that the Er3+/Yb3+ co-doped NCs modified with 6AA may potentially be useful as fluorescent biological temperature sensors.

Graphical abstract: Er3+/Yb3+ co-doped nanocrystals modified with 6-aminocaproic acid for temperature sensing in biomedicine

Supplementary files

Article information

Article type
Paper
Submitted
16 Oct 2019
Accepted
04 Dec 2019
First published
19 Dec 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 42228-42235

Er3+/Yb3+ co-doped nanocrystals modified with 6-aminocaproic acid for temperature sensing in biomedicine

B. Wu, L. Zhao, Y. Wang, H. Dong and H. Yu, RSC Adv., 2019, 9, 42228 DOI: 10.1039/C9RA08447A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements