Issue 55, 2019

A N-doped graphene–cobalt nickel sulfide aerogel as a sulfur host for lithium–sulfur batteries

Abstract

Herein, three-dimensional (3D) N-doped reduced graphene oxide (N-rGO) nanosheets were decorated with a uniform distribution of Co–Ni–S (CNS) nanoparticles to form the CNS/N-rGO composite as a sulfur host material for lithium–sulfur batteries. The CNS nanoparticles and N in CNS/N-rGO strongly interact with polysulfides, whereas graphene, as a conductive network, can improve its electrical conductivity. A CNS/N-rGO/sulfur composite cathode was prepared via the sulfur melting diffusion method. The electrochemical study showed that the CNS/N-rGO/sulfur cathode delivered an initial discharge capacity of 1430 mA h g−1 at a current density of 0.1C. Moreover, it retained a specific capacity of 685 mA h g−1 after 300 cycles at 0.5C with a coulombic efficiency of 98%, which was better than that of commercial rGO. This composite was used as a sulfur cathode for a lithium–sulfur battery, exhibiting excellent rate capability and remarkable performance in terms of long cycling stability.

Graphical abstract: A N-doped graphene–cobalt nickel sulfide aerogel as a sulfur host for lithium–sulfur batteries

Supplementary files

Article information

Article type
Paper
Submitted
09 Jul 2019
Accepted
24 Sep 2019
First published
10 Oct 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 32247-32257

A N-doped graphene–cobalt nickel sulfide aerogel as a sulfur host for lithium–sulfur batteries

P. Wu, H. Hu, N. Xie, C. Wang, F. Wu, M. Pan, H. Li, X. Wang, Z. Zeng, S. Deng and G. Dai, RSC Adv., 2019, 9, 32247 DOI: 10.1039/C9RA05202J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements