Jump to main content
Jump to site search

Transfer of Functional Thermoresponsive Poly(glycidyl ether) Coatings for Cell Sheet Fabrication from Gold to Glass Surfaces


Thermoresponsive polymer coatings can facilitate cell sheet fabrication under mild conditions by promoting cell adhesion and proliferation at 37 °C. At lower temperatures the detachment of confluent cell sheets is triggered without enzymatic treatment. Thus, confluent cell sheets with intact extracellular matrix for regenerative medicine or tissue engineering applications become available. Herein, we applied the previously identified structural design parameters of functional, thermoresponsive poly(glycidyl ether) brushes on gold to the more application-relevant substrate glass via the self-assembly of a corresponding block copolymer (PGE-AA) with a short surface-reactive, amine-presenting anchor block. Both, physical and covalent immobilization on glass via either multivalent ionic interactions of the anchor block with bare glass or the coupling of the anchor block to a polydopamine (PDA) adhesion layer on glass resulted in stable coatings. Atomic force microscopy revealed a high degree of roughness of covalently attached coatings on the PDA adhesion layer, while physically attached coatings on bare glass were smooth and in the brush-like regime. Cell sheets of primary human dermal fibroblasts detached reliably (86%) and within 20±10 min from physically tethered PGE-AA coatings on glass when prepared under cloud point grafting conditions. The presence of the laterally inhomogeneous PDA adhesion layer, however, hindered the spontaneous temperature-triggered cell detachment from covalently grafted PGE-AA, decreasing both detachment rate and reliability. Despite being only physically attached, self-assembled monolayer brushes of PGE-AA block copolymers on glass are functional and stable thermoresponsive coatings for application in cell sheet fabrication of human fibroblasts as determined by x-ray photoelectron spectroscopy.

Back to tab navigation

Supplementary files

Publication details

The article was received on 18 Dec 2017, accepted on 14 Feb 2018 and first published on 14 Feb 2018

Article type: Paper
DOI: 10.1039/C7TB03263C
Citation: J. Mater. Chem. B, 2018, Accepted Manuscript
  •   Request permissions

    Transfer of Functional Thermoresponsive Poly(glycidyl ether) Coatings for Cell Sheet Fabrication from Gold to Glass Surfaces

    S. Heinen, S. Rackow, J. L. Cuellar-Camacho, I. S. Donskyi, W. E. S. Unger and M. Weinhart, J. Mater. Chem. B, 2018, Accepted Manuscript , DOI: 10.1039/C7TB03263C

Search articles by author