Issue 47, 2018

A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA2PbI4 perovskite

Abstract

Carbon electrode-based perovskite solar cells (PSCs) without hole transport materials (HTMs) are regarded as a promising alternative architecture to realize low-cost, stable photovoltaics. However, poor hole transport and severe charge recombination at the interface of perovskite and carbon layers degrade the power conversion efficiency (PCE) of carbon-based PSCs. Here we report on an innovative method to post-treat a carbon electrode with phenylethylammonium iodide (PEAI), for the growth of a two-dimensional (2D) perovskite at the interface between the perovskite and carbon layers. The resulting ultrathin PEA2PbI4 layer formed within the perovskite/carbon interface improved the poor perovskite/carbon contact. The favorable conduction and valence energy levels of the 2D perovskite interlayer greatly suppressed interfacial charge recombination, which stems from the absence of an HTM. Using our fabrication method, the average PCE of devices was boosted from 11.5% to 14.5% with minimal hysteresis loss, and a maximum PCE of 15.6% was achieved. Moreover, the PEAI-treated devices showed excellent ambient stability. The dual protection of the hydrophobic carbon and 2D perovskite layers enabled the device to retain 92% of its initial PCE after 1000 h of exposure to ambient conditions (relative humidity: 40 ± 5%). The thermal stability of the devices was also enhanced, showing no efficiency loss after thermal testing at 150 °C, due to suppressed ion migration.

Graphical abstract: A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA2PbI4 perovskite

Supplementary files

Article information

Article type
Paper
Submitted
29 Sep 2018
Accepted
14 Nov 2018
First published
15 Nov 2018

J. Mater. Chem. A, 2018,6, 24560-24568

A highly stable and efficient carbon electrode-based perovskite solar cell achieved via interfacial growth of 2D PEA2PbI4 perovskite

K. Lee, J. Kim, H. Yu, J. W. Lee, C. Yoon, S. K. Kim and J. Jang, J. Mater. Chem. A, 2018, 6, 24560 DOI: 10.1039/C8TA09433K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements