Issue 22, 2018

Combinatorial identification of a highly soluble phase-selective organogelator with high gelling capacity for crude oil gelation

Abstract

Excellent solution-based gelators are generally advantaged by a short gelling time and low gelator loading when compared to powder gelators having a structurally similar backbone. However, high solubility in essentially non-toxic carrier solvents such as ethanol and ethyl acetate still presents a significant bottleneck to their commercial use in large-scale treatment of marine oil spills. In this work, we present a molecular strategy for rapid evolution of a highly soluble POSG (6a-Phe-C4) with high gelling ability toward seven types of (un)weathered crude oils at room temperature. Discovered from a total of 116 PSOGs, gelator 6a-Phe-C4 possesses a record-high solubility of 380 mg mL−1 in a mixed carrier solvent (ethyl acetate : ethanol = 3 : 2, v/v). This value is even higher than the solubility of 359 mg mL−1 for NaCl in water. Moreover, its gelling abilities toward two types of heavy crude oils and three types of highly weathered crude oils at room temperature are much better than those of the best solution-based gelator F-Leu-C4 recently developed by us. As such, the amounts of carrier solvent required now can be reduced markedly to 1.8–5.7 vol% of oil to be gelled, which are 0.4–5.8 times smaller than those needed for F-Leu-C4.

Graphical abstract: Combinatorial identification of a highly soluble phase-selective organogelator with high gelling capacity for crude oil gelation

Supplementary files

Article information

Article type
Communication
Submitted
14 Apr 2018
Accepted
15 May 2018
First published
15 May 2018

J. Mater. Chem. A, 2018,6, 10196-10200

Combinatorial identification of a highly soluble phase-selective organogelator with high gelling capacity for crude oil gelation

J. Li, Y. Huo and H. Zeng, J. Mater. Chem. A, 2018, 6, 10196 DOI: 10.1039/C8TA03415J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements