Jump to main content
Jump to site search

Issue 16, 2018
Previous Article Next Article

High efficiency ternary polymer solar cells based on a fused pentacyclic electron acceptor

Author affiliations

Abstract

Nonfullerene acceptors (NFAs) with a fused-ring backbone usually tend to form large aggregations in the active layer when blended with polymer donors. One solution is to increase the steric hindrance by introducing bulky side chains onto the planar backbone; however, the enlarged intermolecular distance hampers the effective transport of electrons. Here, we provide a ternary-blend strategy to suppress the aggregation of NFAs but preserve their close π–π stacking in the nanophase. Using this method, a fused pentacyclic electron acceptor IDT-2O, which has fewer fused rings and a simpler synthetic route than commonly used heptacyclic and nonacyclic acceptors, can surprisingly demonstrate a high power conversion efficiency of 10.67%, higher than those of the corresponding binary devices. In such ternary-blend devices, PC71BM was selected as the third component to improve the film morphology and enhance the charge transport ability. As a result, increased short-circuit current and fill factors were achieved in these ternary-blend solar cells, giving rise to boosted photoelectric conversion efficiency.

Graphical abstract: High efficiency ternary polymer solar cells based on a fused pentacyclic electron acceptor

Back to tab navigation

Supplementary files

Publication details

The article was received on 29 Jan 2018, accepted on 17 Mar 2018 and first published on 20 Mar 2018


Article type: Paper
DOI: 10.1039/C8TA00944A
Citation: J. Mater. Chem. A, 2018,6, 6854-6859
  •   Request permissions

    High efficiency ternary polymer solar cells based on a fused pentacyclic electron acceptor

    C. Zhang, S. Feng, Y. Liu, S. Ming, H. Lu, D. Ma, X. Xu, Y. Wu and Z. Bo, J. Mater. Chem. A, 2018, 6, 6854
    DOI: 10.1039/C8TA00944A

Search articles by author

Spotlight

Advertisements