Issue 2, 2018

Through-silicon via submount for the CuO/Cu2O nanostructured field emission display

Abstract

A three dimensional (3D) field emission display structure was prepared using CuO/Cu2O composite nanowires (NWs) and a three dimensional through silicon via (3D-TSV) technique. The experimental results indicated that the diameter and length of the Si via were about 100 μm and 200 μm, respectively. For the 3D field emission structure, high-density CuO/Cu2O composite nanowires (NWs) were grown on the concave TSV structure using thermal oxidation. The field emission turn-on field and enhancement factor of the CuO/Cu2O composite NWs were 15 V μm−1 and ∼1748, respectively. With regard to field emission displays, we successfully used the 3D field emission structure to excite the orange phosphors.

Graphical abstract: Through-silicon via submount for the CuO/Cu2O nanostructured field emission display

Article information

Article type
Paper
Submitted
12 Nov 2017
Accepted
19 Dec 2017
First published
02 Jan 2018
This article is Open Access
Creative Commons BY license

RSC Adv., 2018,8, 706-709

Through-silicon via submount for the CuO/Cu2O nanostructured field emission display

C. Lu, S. Chang and T. Hsueh, RSC Adv., 2018, 8, 706 DOI: 10.1039/C7RA12368J

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements