Issue 12, 2018

A multi-walled carbon nanotube-based magnetic molecularly imprinted polymer as a highly selective sorbent for ultrasonic-assisted dispersive solid-phase microextraction of sotalol in biological fluids

Abstract

A modified multiwalled carbon nanotube-based magnetic molecularly imprinted polymer (MWCNT-MMIP) was synthesized and applied for selective extraction and preconcentration of sotalol (SOT) in biological fluid samples by using ultrasonic-assisted dispersive solid-phase microextraction (UA-DSPME). The synthetic particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy (FTIR). The screening of UA-DSPME was preliminarily performed by Plackett–Burman design (PBD) and, subsequently, central composite design (CCD) under response surface methodology (RSM) was used individually for evaluation of the significant factors and their possible interaction effects on the adsorption process. Batch mode adsorption studies were performed to evaluate the adsorption kinetics, adsorption isotherms, and selective recognition of MWCNT-MMIPs. The adsorption equilibrium of SOT using MWCNT-MMIPs could be well-defined with the Langmuir isotherm model and the maximum adsorption capacity was calculated to be 79.36 mg g−1. Under optimized conditions, the SOT was selectively and effectively extracted in real biological samples and good linearity was obtained with correlation coefficients (R2) over 0.996 and the detection limit (S/N = 3) was 0.31 ng mL−1. The average recoveries of the spiked human urine and plasma samples at four concentration levels of SOT ranged from 94.60–102.50 and 97.40–101.60 percent, respectively, and the relative standard deviation was found to be lower than 4.50%. The results illustrated that the proposed MWCNT-MMIPs@UA-DSPME extraction method coupled with HPLC-UV determination could be applied for sensitive and selective analysis of trace SOT in biological fluid samples.

Graphical abstract: A multi-walled carbon nanotube-based magnetic molecularly imprinted polymer as a highly selective sorbent for ultrasonic-assisted dispersive solid-phase microextraction of sotalol in biological fluids

Supplementary files

Article information

Article type
Paper
Submitted
23 Dec 2017
Accepted
29 Apr 2018
First published
01 May 2018

Analyst, 2018,143, 2862-2875

A multi-walled carbon nanotube-based magnetic molecularly imprinted polymer as a highly selective sorbent for ultrasonic-assisted dispersive solid-phase microextraction of sotalol in biological fluids

S. Ansari and S. Masoum, Analyst, 2018, 143, 2862 DOI: 10.1039/C7AN02077E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements